Iceland Training Programe
S1 + S2 Training
S1 + S2 Training Syllabus - Reykjavik CTA
Within Iceland, we have two training airports on which you will be initially trained on they are:
- BIKF - Keflavik
- BIRK - Reykjavik
Our S1 and S2 training is combined, so you will do the whole ground and tower syllabus in one split over multiple training sessions.
S1 Training
- You will begin your training on our Moodle page, where you will be taken through the setup of Euroscope and some basic fundamentals needed to know to be a controller.
- Once compleated you will then arrange your first session with your mentor. Your mentor will then take you through the basics of the following topics below:
Euroscope
- Confirming setup of Euroscope sector file
- Logging onto the network with the correct callsign
- Setting up an ATIS
- Departure List
- Tag familiarisation
- Assigning SIDS, squawks and flight levels
Procedures
- Understand the basic procedures for delivery/ground
- Issue correct clearances IFR/VFR
- Pushback
- Taxi
- Hand Offs
Phraseology
- Understand the correct phraseology (ICAO)
- Correct understanding of ATIS phraseology (Metars)
All of the above will initially be completed on sweatbox before moving onto online practical training
Theory Exam
Once all is complete, after 2-3 sessions, you will be issued your theory test to obtain your S1 rating so you can then transition onto network training.
Online Practical Training
Once passed the theory, you will then be issued your S1 rating and will progress onto practical online training with your mentor on ground position.
Once your mentor is happy, you will then be released to control GND positions at BIKF and BIRK without your mentor.
That completes the S1 portion of the training
S2 Training
During your S2 training, it will be a mixture of both sweatbox and network sessions. You will be taken through the basics of tower controlling and be assessed in the following standards:
Take-offs + Landings
- Understand the correct time to issue line-up clearances
- Understand the correct time to issue take-off clearances
- Understand the correct time to issue landing clearances
- Understand correct separation timings for arrivals/departures based on the WTC.
- Understand when to issue a go-around
- Understand when to issue late landing clearances.
- Understand what to follow when an aircraft calls a missed approach.
- Understand the meaning of full stop and touch-and-go and missed approaches.
VFR
- Understand how to issue a VFR clearance for circuits (Upwind, downwind, base, final)
- Understand how to issue a VFR clearance for a zone transition
- Understand the circuit patterns for BIKF and BIRK
- Understand how to issue an exit/entry into the CTA
- When to issue orbits to pilots so as not to hinder IFR traffic.
METARs
- Understanding how to decode METARs
All of the above for S2 will be a mixture of sweatbox scenarios and online practical training
Theory Exam
Just before your solo validation, you will be issued with your S2 theory test. Once completed, you can then be placed on your solo validation
Solo Validation
Once you have compleated your theory exam and your mentor thinks you are ready for your exam, they will request your solo validation for BIKF tower. The Training Lead will issue this to you, and it will last for 30 days.
Controller Practical Test
Once you have had some time solo controlling, you will then book your CPT with the Training Lead.
This will consist of a 2+ hr practical exam on BIKF tower on the network testing all your S2 skills.
This marks the end of your S2 training you will gain your S2 rating upon passing your CPT
S3 Training
S3 Training Syllabus - Reykjavik CTA
Once you have compleated 50 hours at S2, you can then submit a training request to complete your S3 rating.
Your S3 training will be completed on Keflavik Approach, which covers the two airports of
- BIKF - Keflavik
- BIRK - Reykjavik
Our S3 training only covers Keflavik Approach. However, you can read up on the other airports that have a radar station.
S3 Training
- Your training will be a mix of sweatbox and online network sessions
- You will be trained on the competencies below:
Euroscope
- Tag Handling and manipulation
- TopSky Plugin
- Radar Screen
- TopDown of two airports - BIKF, BIRK
Management
- Correct management of airspace
- Correct management of priority
- Correct management of speed control and when to use it
- Correct management of vectors and when to use them e.g IFR circuits
- Correct provision of TOP DOWN services when required
Seperation
- Understand correct separation within your airspace e.g SID/STAR separation (Some types stated above in management)
- Understand knowledge of the different wake turbulence categories and how to manage
VFR
- Understand how VFR operates within your airspace
- Issuing traffic information without prompts from mentor
- Able to resolve conflicts between IFR and VFR
Local Regulations
- Good knowledge of the local regulations for the training area
- Understand the airspace classification for the area in which you are controlling
Theory Exam
As with S2, just before your solo validation is issued, your mentor will request your S3 theory test from the training lead. This must be passed before solo validation is issued.
Solo Validation
Once you have compleated your theory exam and your mentor thinks you are ready for your exam, they will request your solo validation for BIKF approach. The Training Lead will issue this to you, and it will last for 30 days.
Controller Practical Test
Once you have had some time solo controlling, you will then book your CPT with the Training Lead.
This will consist of a 2+ hr practical exam on BIKF tower on the network testing all your S3 skills.
This marks the end of your S3 training. Once CPT is passed, you will be issued with your S3 rating