EuroScope
Swedish setup for EuroScope
1. Track labels
The following descriptions show the positions of the data fields in the different labels of the default sets that are provided with the plugin and the available mouse click areas on them. The contents, any special coloring rules and the color definitions themselves for the data fields are explained in the General part of the manual set. Note that an uncorrelated primary radar track will not show a label at all.
Data fields in italic can be selected globally on/off via the Track Control Window, or for some of them, for individual tracks via the selected or Extended track label. In case of the CFL/PEL field, only the PEL display can be selected off. For the COPN/COPX field, only the COPX display can be selected off. Data fields in parentheses are blank (instead of displaying the field name) when there is no data
1.1 Uncorrelated label
Track label not correlated with a flight plan.
Unselected track
(EMRG ALRT)
(FLTID)/TSSR
AFL (a) GS
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
Selected track
(EMRG ALRT)
(FLTID) TSSR
AFL (a) GS
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
1.2 Reduced label
Track label correlated with a flight plan. The Reduced label is shown for uncontrolled, unconcerned and notified tracks.
Unselected track
(V ALRT W S EMRG)
CALLSIGN (SI) (NRAC) ATYP WTC TSSR
AFL (a) FCOPX GS NPT ADES
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
Selected track
(COM * V ALRT W Y A + C TEL I S EMRG COORD CPDLC_E CPDLC_W TEXT2)
CALLSIGN SI (NRAC) ATYP WTC TSSR
AFL (a) FCOPX GS NPT ADES
CFL
(OP_TEXT)[max 2 lines of text]
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
1.3 Standard label
Track label correlated with a flight plan. The Standard label is shown for Coordinated, Assumed, Redundant and Informed tracks.
Unselected track
(COM * V ALRT W Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG)
(MTDC) CALLSIGN (SI) (NRAC) ATYP WTC TSSR
AFL (a) COPN/COPX GS NPT RFL ADES
CFL/PEL XFL AHDG ASP ARC
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
Selected track
(COM * V ALRT W Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG)
(MTDC) CALLSIGN (SI) (NRAC) ATYP WTC TSSR
AFL (a) COPN/COPX GS NPT RFL ADES
CFL/PEL XFL AHDG ASP ARC
(OP_TEXT)[max 2 lines of text]
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
1.4 Extended label
Extended track label correlated with a flight plan. The Extended label can be toggled by right click on Callsign for any track label except Uncorrelated tracks.
(COM * V ALRT W Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG SQ FF STAFF)
(MTDC) CALLSIGN (SI) (NRAC) ATYP WTC TSSR ASSR PSSR FLTID FLTADD CODE
AFL (a) COPN/COPX GS NPT RFL ADES ADEP EOBT/ATD
CFL/PEL XFL AHDG ASP ARC EET
SECTOR STATE LFUNC ALT1 ALT2
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)
COMP_CS
FIELD15[max 9 lines of text]
(FIELD18)[max 6 lines of text]
(FMF)
(MALRT)
OP_TEXT
OP_TEXT2
1.5 Mouse functions in track labels
| Data Fields | Description | Left-click action | Right-click action |
|---|---|---|---|
| • | Frequency Set from Callsign menu |
||
| • | Mark Set from Callsign menu |
||
| + | Field 18 / FMF indicator | Open extended label | |
| * | Unit | Toggle Units | |
| A | Manual alerts | Open extended label | |
| a | Vertical Trend Indication | Invoke SEP tool with VSEP | |
| ADEP | Departure aerodrome | For debugging only: Toggle route precition points draw | |
| ADES | Destination aerodrome | Open FPL Window | Toggle ADES display |
| AFL | Actual Flight Level | Toggle Level Band Highlight (AFL) | |
| AHDG | Assigned heading | Open AHDG menu | Clear AHDG value / ACK, RJC or FAIL coord |
| ALRT | Alert message in priority order: “MSAW” “APW” “AIW” “L”(CLAM) “D” (DUPE) |
Acknowledge AIW alert | |
| ALT1/2 | Open FPL Window | ||
| ARC | Assigned vertical rate | Open ARC menu | Clear ARC value / ACK, RJC or FAIL coord |
| ASP | Assigned speed | Open ASP menu | Clear ASP value / ACK, RJC or FAIL coord |
| ASSR | Assigned mode A code | Open ASSR menu | Send CPDLC Squawk SSR |
| ATYP | Aircraft type | Toggle ATYP highlight | Toggle ATYP display |
| C | Inbound clearance | Toggle Inbound clearance flag | |
| CALLSIGN | Callsign | Open Callsign menu | Open Extended label |
| CFL / PEL | Cleared Flight Level or Planned Entry Level |
Open CFL/PEL menu | Open Vertical Aid Window |
| CODE | FPL mode S hex code | ||
| COM | Communication type | Open communication type popup | |
| COMP_CS | ICAO RTF callsign | ||
| COORD | Coordination message ROF message sent / received: “ROF” Transfer with release: “F” fully released “C” released for climb “D” released for descent “T” released for turns |
Open Tactical transfer menu | Open Tactical Info Window |
| COPN / COPX | Entry point or Exit point | Open Waypoint menu | Toggle Route draw with MTCD |
| CPDLC_E | CPDLC Emergency messages: “SQ7500” “MAYDAY” “PAN” |
Open CPDLC Emergency Acknowledgment menu | |
| CPDLC_W | CPDLC Warning | CPDLC Warning functions | Open CPDLC Current Message Window |
| DGS | Downloaded ground speed | Toggle DGS display | |
| DHDG | Downloaded heading | Toggle DHDG display | |
| DIAS | Downloaded indicated airspeed Only estimated value if upper wind/temp data available. |
Toggle DIAS display | |
| DMACH | Downloaded Mach number Only estimated value if upper wind/temp data available. |
Toggle DIAS display | |
| DRC | Downloaded rate of climb/descent | Toggle DRC display | |
| DSFL | Downloaded Selected Flight Level Not available |
Toggle DSFL display | |
| EET | Estimated Elapsed Time | Open FPL Window | |
| EMRG | Emergency: “HI” for squawk 7500 “CF” for squawk 7600 “EM” for squawk 7700 |
||
| EOBT / ATD | Estimated Off Block TIme / Actual Time of Departure | Open FPL Window | |
| F | No fix warning If IFR flight is not routing via one of specified fixes to its destination |
Toggle No Fix flag | |
| FCOPX | FIR COPX point | ||
| FF | Feeder fix (provided by AMAN) |
||
| FIELD15 | TAS, RFL and Route | ||
| FIELD18 | Other information | ||
| FLTADD | Mode S transponder address | ||
| FLTID | Aircraft identification | ||
| FMF | Flight Message Field No information shown |
||
| GS | Ground Speed | Invoke SEP tool | Toggle GS display |
| I | Flight information If OP_TEXT has data |
Open extended label | |
| M | Military coordination | Toggle Military Coordination flag | Toggle Route draw with SAP |
| MALRT | Manual alerts Entered via Callsign menu: "MAPP" "IRREG" "WEATHER" |
||
| MTCD | MTCD indicator “•” if aircraft has an MTCD conflict |
Invoke SEP tool | Toggle Route draw with MTCD |
| NPT | Next route point | Open Waypoint menu | Open CPDLC Current Message Window |
| NRAC | Number of aircraft Number can be set by prefixing the aircraft type in the FPL by “X/” where X is the number. |
||
| NSSR | SSR warning Displays ASSR if different from TSSR |
Open ASSR menu | Send CPDLC Squwak SSR |
| OP_TEXT | Flight information message | Edit OP_TEXT | |
| OP_TEXT2 | OP-TEXT2 message | Edit OP_TEXT2 | |
| P | No P-RNAV/RNAV1 capability | ||
| PSSR | Previous mode A code | ||
| R | No B-RNAV/RNAV5 capability | ||
| RFL | Requested Flight Level | Open RFL menu | Open CPDLC Current Message Window |
| S | Mode S mismatch indicator | ||
| SI | Sector Indicator | Assume / Transfer | Toggle SI frequency |
| SQ | Arrival sequence number (provided by AMAN) |
||
| STAFF | Scheduled Time of Arrival at feeder fix (provided by AMAN) |
||
| SECTOR STATE | Current system state Notified: NOTI Coordinated: COOR On-going coordination: ONGC Assumed: ASSU Transfer initiated: TRAN Redundant: REDU Terminated: TERM Free: FREE On-contact: ONCT |
||
| TEXT2 | OP-TEXT2 message | Edit OP_TEXT2 | Open extended label |
| TSSR | Aircraft transponded mode A code | ||
| TTL_TTG | Time To Lose/Gain at feeder fix (provided by AMAN) |
||
| V | Flight rules “V” if VFR “Y” if first IFR and later VFR “Z” if first VFR and later IFR |
||
| W | No RVSM capability | ||
| WTC | Wake turbulence category | Toggle WTC highlight | |
| XFL | Exit Flight Level | Open XFL menu | Toggle Level Band Highlight (XFL) |
| Y | No 8.33kHz capability |
SDSDSD