TWR Profile

1. Introduction

1.1 General

The Swedish TWR profile makes use of advanced ground states and flight lists, this requires Euroscope v.3.2.1.27 or later.

Since TopSky is designed to be used in an Area/Approach setting the functionality of that setup is not suited for the tower environment. The tower setup is intended to be used only by DEL, GND or TWR positions (with or without an associated TMA). APP and CTR positions shall use the TopSky setup.

There are two versions of the tower setup, one for use at airports with A-CDM (Airport Collaborative Decision Making) and one for airports without. The tower setup uses EuroScope lists in a way similar to a FPB (Flight Progress Board A.k.a. Strips) where the progress of a flight can be managed.

1.2 Flight Progress Board

The FPB (Flight Progress Board) consists of default EuroScope lists arranged in a way that lets you monitor and manage the progress of a flight. Two TopSky lists, Sector and Uncontrolled, are also part of the setup and they will be used to handle airborne traffic. All lists in the FPB have columns and functions specific to that phase of flight.

A departing flight will appear in the Start-up list and will successively move to the Taxi Out list, Take-Off list and then to the Sector list. In the Start-up list you can manage any action necessary from receiving the flight plan to start-up and push-back. Once the aircraft calls for taxi the flight can be toggled to the Taxi Out list. When the aircraft receives the take-off clearance it will be toggled to the Take-Off list and once airborne it will show in the Sector list.

An arriving aircraft will initially appear in the Sector list and with less than 40 track miles to destination will also show in the ADC Sector list. The ADC Sector list will show the arrival sequence. Once the aircraft has landed it can be toggled to the Taxi In list.

Additionally, the setup contains the Uncontrolled list, showing all VFR flights, the Controller list and the METAR list. These lists are not forming part of the FPB.

Depending on what position you are working, you are encourage to remove lists that are unnecessary for your task. This will free up screen space and let you focus on the responsibilities specific to your working position. Below is a table suggesting which lists to have open for which position.

	TWR	GND	DEL
Startup		X	X
Taxi out	X	X
Take-off	X
ADC Sector	X	X*
Taxi in		X
Sector	X

*Not needed if TWR update STS to TAXI IN after A/C vacates RWY

It is recommended to have the TWR setup in the same Euroscope instance as the primary situation display (radar display). This way the integration between the FPB, TopSky lists and situation display will be maintained and functions like the Flight Leg will work.

2. Ground Track Labels

This chapter describes the track labels as shown on ASRs using the Ground Radar plugin. For a description of TopSky track labels (such as shown on ESAA_TWR_APP.asr), see TopSky.

The track symbols and labels are colored according to the flight’s status (arrival, departure or overflight/unknown).

• Arrivals are yellow
• Departures are light blue
• Overflight/unknown are light grey.

Data fields in normal text e.g. "FCOPX"SID", can be selected globally on/off via the Track Control Window, or for some of them, for individual tracks via the selected or Extended track label.SETTINGS->Labels.
Data fields in bold text e.g. "CALLSIGN", is always shown
Data fields in parentheses e.g. "(NRAC)ALRT)", are blank (instead of displaying the field name) when there is no data.

In

Right-clicking case ofon the CFL/PELany field,track onlysymbol toggles the PELheading display can be selected off. For the COPN/COPX field, only the COPX display can be selected off.lines.

ESGG

1.2.1 Uncorrelated labelDepartures

Track label notfor correlatedoutbound with a flight plan.flights.

Unselected track

(ALRT ASSR_E COMM)
CALLSIGN (EMRG ALRT)RMK)
(FLTID)/TSSR
AFL (a)ATYP/WTC GS
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)DEP

Selected track

(ALRT ASSR_E COMM)
(EMRG ALRT)CALLSIGN RMK
(FLTID) TSSR
AFL (a) GS
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)ATYP/WTC DEP

1.2.2 Reduced labelArrivals

Track label correlated with a flight plan. The Reduced label is shown for uncontrolled,inbound unconcerned and notified tracks.flights.

Unselected track

(V ALRT W S EMRG)COMM)
CALLSIGN (SI)STAND) (NRAC) ATYP WTC TSSR
AFL (a)ATYP/WTC FCOPX GS NPT ADES
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)RMK

Selected track

(COM * V ALRT WCOMM)
Y A + C TEL I S EMRG COORD CPDLC_E CPDLC_W TEXT2)CALLSIGN STAND
CALLSIGN SI (NRAC) ATYP ATYP/WTC TSSRRMK
AFL (a) FCOPX GS NPT ADES
CFL
(OP_TEXT) [max 2 lines of text]
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)

1.2.3 Standard labelOverflight

Track label correlated with a flight plan. The Standard label is shown for Coordinated,flights Assumed,that Redundantare andneither Informedoutbound tracks.nor inbound.

Unselected track

(COM * V ALRT WCOMM)
Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG)CALLSIGN
(MTDC) CALLSIGN (SI)ATYP/WTC (NRAC) ATYP WTC TSSR
AFL (a) COPN/COPX GS NPT RFL ADES
CFL/PEL XFL AHDG ASP ARC
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)RMK

Selected track

(COM * V ALRT WCOMM)
Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG)CALLSIGN
ATYP/WTC RMK

ESSA

2.4 Departures

Track label for outbound flights.

Unselected track

(MTDC) CALLSIGN (SI) (NRAC) ALRT ASSR_E COMM)
CALLSIGN
ATYP WTC TSSRDEP
REG (RMK)

Selected track

(ALRT ASSR_E COMM)
CALLSIGN
AFL (a) COPN/COPX GS NPT RFL ADESATYP WTC DEP
CFL/PEL XFL AHDG ASP ARCREG RMK

2.5 Arrivals

Track label for inbound flights.

Unselected track

(ALRT COMM)
CALLSIGN STAND
ATYP WTC DEP
REG (RMK)

Selected track

(ALRT COMM)
CALLSIGN STAND
(OP_TEXT) [max 2 lines of text]
(DSFL) (DHDG) (DIAS) (DMACH) (DRC)

1.4 Extended label

Extended track label correlated with a flight plan. The Extended label can be toggled by right click on Callsign for any track label except Uncorrelated tracks.

(COM * V ALRT W Y R P M • • A + C TEL I F S EMRG COORD NSSR CPDLC_E CPDLC_W TEXT2 TTLTTG    SQ FF STAFF)ATYP WTC DEP
REG RMK

2.6 Overflight

Track label for flights that are neither outbound nor inbound.

Unselected track

(MTDC) CALLSIGN ALRT COMM)
CALLSIGN
ATYP WTC
REG (SI) RMK)

Selected track

(NRAC) ATYP WTC    ALRT TSSR ASSR PSSR FLTID FLTADD CODECOMM)
CALLSIGN
AFL (a) COPN/COPX GS NPT RFL ADES     ADEP EOBT/ATDATYP WTC
CFL/PEL XFL AHDG ASP ARC           EETREG RMK

SECTOR

Other

STATE LFUNC                ALT1 ALT2

For (DSFL) (DHDG) (DIAS) (DMACH) (DRC)
a COMP_CS
FIELD15 [max 9 linesdescription of text]
track labels shown at other airports than ESGG and ESSA, refer to Ground Radar plugin for EuroScope - General.pdf (FIELD18)4. Track presentation) [maxincluded 6in linesthe ofGNG text]
(FMF)
(MALRT)
OP_TEXT
OP_TEXT2
package.

1.52.7 Mouse functions in track labels

assignment

Data Fields	Description	Left-click action	Right-click action
•ALRT	Frequency SetSafety fromnet Callsignalert menuindicator (yellow or red)
•ASSR_E	Mark SetSSR fromcode Callsignerror menuindicator (red)
+	Field 18 / FMF indicator		Open extended label
*	Unit	Toggle Units
A	Manual alerts		Open extended label
a	Vertical Trend Indication	Invoke SEP tool with VSEP
ADEP	Departure aerodrome		For debugging only: Toggle route prediction points draw
ADES	Destination aerodrome	Open FPL Window	Toggle ADES display
AFL	Actual Flight Level		Toggle Level Band Highlight (AFL)
AHDG	Assigned heading	Open AHDG menu	Clear AHDG value / ACK, RJC or FAIL coord
ALRT	Alert message in priority order: “MSAW” “APW” “AIW” “L”(CLAM) “D” (DUPE)		Acknowledge AIW alert
ALT1/2		Open FPL Window
ARC	Assigned vertical rate	Open ARC menu	Clear ARC value / ACK, RJC or FAIL coord
ASP	Assigned speed	Open ASP menu	Clear ASP value / ACK, RJC or FAIL coord
ASSR	Assigned mode A code	Open ASSR menu	Send CPDLC Squawk SSR
ATYP	Aircraft type (ICAO)	Toggle ATYP highlight	ToggleOpen ATYPextended display
C	Inbound clearance	Toggle Inbound clearance flag	label
CALLSIGN	Callsign	Open Callsign menu	Open Extended label
CFL / PEL	Cleared Flight Level or Planned Entry Level	Open CFL/PEL menu	Open Vertical Aid Window
CODE	FPL mode S hex code
COMCOMM	Communication type	Openindicator communication type popup
COMP_CS	ICAO RTF callsign
COORD	Coordination message ROF message sent / received:(yellow) “ROF” Transfer with release: “F” fully released “C” releasedr” for climbvoice receive only “D” releasedt” for descent “T”text released for turns	Open Tactical transfer menu	Open Tactical Info Window
COPN / COPX	Entry point or Exit point	Open Waypoint menu	Toggle Route draw with MTCD
CPDLC_E	CPDLC Emergency messages: “SQ7500” “MAYDAY” “PAN”	Open CPDLC Emergency Acknowledgment menu
CPDLC_W	CPDLC Warning	CPDLC Warning functions	Open CPDLC Current Message Window
DGS	Downloaded ground speed		Toggle DGS display
DHDG	Downloaded heading		Toggle DHDG display
DIAS	Downloaded indicated airspeed Only estimated value if upper wind/temp data available.		Toggle DIAS display
DMACH	Downloaded Mach number Only estimated value if upper wind/temp data available.		Toggle DIAS display
DRC	Downloaded rate of climb/descent		Toggle DRC display
DSFL	Downloaded Selected Flight Level Not available		Toggle DSFL display
EET	Estimated Elapsed Time	Open FPL Window
EMRG	Emergency: “HI” for squawk 7500 “CF” for squawk 7600 “EM” for squawk 7700
EOBT / ATD	Estimated Off Block Time / Actual Time of Departure	Open FPL Window
F	No fix warning If IFR flight is not routing via one of specified fixes to its destination	Toggle No Fix flag
FCOPX	FIR COPX point
FF	Feeder fix (provided by AMAN)
FIELD15	TAS, RFL and Route
FIELD18	Other information
FLTADD	Mode S transponder address
FLTID	Aircraft identification
FMF	Flight Message Field No information shown
GS	Ground Speed	Invoke SEP tool	Toggle GS display
I	Flight information If OP_TEXT has dataonly		Open extended label
LFUNCREG	Aircraft registration code (Read from FPL remarks)
MRMK	MilitaryRemarks (scratchpad/OP-TEXT2 coordination	Toggle Military Coordination flag	Toggle Route draw with SAP
MALRT	Manual alerts Entered via Callsign menu: "MAPP" "IRREG" "WEATHER"text)
MTCDDEP	MTCDDisplays indicator “•”AHDG if aircraftset Displays hasSID anif MTCDno conflictAHDG set.	InvokeOpen SEPSID toolsetup popup list	ToggleOpen Routeassigned drawheading withpopup MTCDlist
NPTSTAND	NextAssigned routearrival pointstand name. Yellow if reassigned and not acknowledged	Open WaypointStand menu	Openmenu. If CPDLCyellow: CurrentAcknowledge Messagenew Window
NRAC	Number of aircraft Number can be set by prefixing the aircraft type in the FPL by “X/” where X is the number.
NSSR	SSR warning Displays ASSR if different from TSSR	Open ASSR menu	Send CPDLC Squawk SSR
OP_TEXT	Flight information message	Edit OP_TEXT
OP_TEXT2	OP-TEXT2 message	Edit OP_TEXT2
P	No P-RNAV/RNAV1 capability
PSSR	Previous mode A code
R	No B-RNAV/RNAV5 capability
RFL	Requested Flight Level	Open RFL menu	Open CPDLC Current Message Window
S	Mode S mismatch indicator
SI	Sector Indicator	Assume / Transfer	Toggle SI frequency
SQ	Arrival sequence number (provided by AMAN)
STAFF	Scheduled Time of Arrival at feeder fix (provided by AMAN)
SECTOR STATE	Current system state Notified: NOTI Coordinated: COOR On-going coordination: ONGC Assumed: ASSU Transfer initiated: TRAN Redundant: REDU Terminated: TERM Free: FREE On-contact: ONCT
TEXT2	OP-TEXT2 message	Edit OP_TEXT2	Open extended label
TSSR	Aircraft transmitted mode A code
TTL_TTG	Time To Lose/Gain at feeder fix (provided by AMAN)
V/Y/Z	Flight rules “V” if VFR “Y” if first IFR and later VFR “Z” if first VFR and later IFR
W	No RVSM capability	assignment
WTC	Wake turbulence category	Toggle WTC highlight
XFL	Exit Flight Level	Open XFL menu	Toggle Level Band Highlight (XFL)
Y	No 8.33kHz capability

2.3. Flight Lists

Data fields in normal text e.g. "EVT", are not normally shown but can be selected in the Collumns menu by pressing the "S" on the top left of the respective list when needed.
Data fields in bold text e.g. "CALLSIGN", are selected as default.
Data fields in parentheses e.g. "(NRAC)", are blank (instead of displaying the field name) when there is no data.

2.3.1 SectorStartup List

Shows traffic from receiving the flight plan until ground state S/U (Start-Up) or S/P (Start-Up & Push-Back).

Start-Up list is sorted by ground state.

iffirstIFRandlaterVFR
“Z”VFR

Data Fields	Description	Left-click action	Right-click action
EVT	VATCAN Event indicatior
(STS)	Ground Status	Open Ground State menu	Assume / Transfer
C/S	CALLSIGNCallsign	Open Callsign menu	Toggle callsign highlight
SI	Sector Indicator	Open next controller popup list	Assume / Transfer
(ETN)R)	EstimatedFlight Timerules “V” Overif sectorVFR “Y” entry
PEL	Plannedif Entryfirst Level	Openand PELlater menu	Open Vertical Aid Window
COPN	Entry Coordination point	Open Waypoint menu	Toggle Route draw with MTCD
No	Number of aircraft. Number can be set by prefixing the aircraft type in the FPL by “X/” where X is the number.IFR
ATYP	Aircraft type	Toggle ATYP highlight
W	Wake turbulence category	Toggle WTC highlight
R(STD)	FlightDeparture rules “V” if VFR “Y” if first IFR and later VFR “Z” if first VFR and later IFRStand
ADEP	Departure aerodrome
ADES	Destination aerodrome	Open ES flight plan dialog
(DRWY)	Departure Runway	Open RWY menu
RTE/AHD	Displays AHDG if set Displays SID if no AHDG set.	Open SID menu	Open AHDG menu
CFL	Cleared Flight Level	Open CFL menu	Open Vertical Aid Window
ASP	Assigned speed	Open ASP menu	Clear ASP value / ACK, RJC or FAIL coord
XFL(XFL)	Exit Flight Level	Open XFL menu	Open Vertical Aid Window
COPX	Exit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
RFL	Requested Flight Level	Open RFL menu	Open CPDLC Current Message Window
PSSR	Previous mode A code		Find PSSR
ASSR(ASSR)	Assigned mode A code	Open ASSR menu	Send CPDLC Squawk SSR
ADEP(CLR)	DepartureCombined aerodromeclearance received flag, DCL dialogue status and CMT (Comment) indicator	Open PDC/DCL Window	Open CMT Pop-up
(RMK)	Remarks (scratchpad text/OP-TEXT2)	Edit scratch pad string(OP_TEXT2)
SIDEOBT	AssignedEOBT SID(Estimated Off Block Time)	Open SIDTime menu (EOBT)	Acknowledge SID Allocation
DRWY(ECTOT)	DepartureVATCAN RunwayEvent CTOT (Calculated Take Off Time)
ADES(CTOT)	DestinationCTOT aerodrome(Calculated Take Off Time)	Open FPLTime Windowmenu (CTOT)	OpenReset ESCTOT flightto plan dialog
FF	Feeder fix (provided by AMAN)
STA	Scheduled Time of Arrival at feeder fix (provided by AMAN)
TTLTTG	Time To Lose/Gain at feeder fix (provided by AMAN)
SI	Sector Indicator	Open next controller popup list	Simulation popup
Not shown	Manual Coordination flag	Accept Manual coordination
ETA	Estimated Time of Arrival
STAR	Assigned STAR	Open STAR menu	Acknowledge STAR Allocation
ARWY	Arrival Runway	Open RWY menu
STD	Arrival Stand	Open Stand menu
OP_TEXT	Flight information message	Edit OP_TEXT
C	Check Indicator	Toggle Check Indicator	EOBT

2.3.2 DepartureTaxi Out List

Shows traffic with ground state TXO (Taxi Out) or xLU (Line Up).

Taxi Out list is sorted by DSQ (Departure Sequence).

aircraft. the

Data Fields	Description	Left-click action	Right-click action
EVT(STS)	EventGround indicatiorStatus	Open Ground State menu	Assume / Transfer
C/S	CALLSIGNCallsign	Open Callsign menu	Toggle callsign highlight
NoSI	NumberSector ofIndicator	Open next controller popup list	Assume / Transfer
(DSQ)	Departure sequence number	Open DSQ menu NumberIf canno benumber setset: Assigns next available sequence number	Advance (decrease) aircraft sequence number by prefixingone
(R)	Flight rules aircraft“V” typeif inVFR “Y” theif FPLfirst byIFR and later VFR “X/”Z” whereif Xfirst isVFR theand number.later IFR
ATYP	Aircraft type	Toggle ATYP highlight
W	Wake turbulence category	Toggle WTC highlight
RRTE/AHD	FlightDisplays rules “V”AHDG if VFRset “Y”Displays SID if first IFR and later VFR “Z” if first VFR and later IFR
TIME	EOBT (Estimated Off Block Time)	Open Time menu (EOBT)
CTOT	CTOT (Calculated Take Off Time)	Open Time menu (CTOT)	Reset CTOT to EOBT
CFL	Cleared Flight Level	Open CFL menu	Open Vertical Aid Window
XFL	Exit Flight Level	Open XFL menu	Open Vertical Aid Window
COPX	Exit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
ADEP	Departure aerodrome
ADES	Destination aerodrome	Open FPL Window	Open ES flight plan dialog
RFL	Requested Flight Level	Open RFL menu
ASSR	Assigned mode A code	Open ASSR menu
AHDG	Assigned heading	Openno AHDG menu	Clear AHDG value / ACK, RJC or FAIL coord
SID	Assigned SIDset.	Open SID menu	AcknowledgeOpen SIDAHDG Allocationmenu
DRWY	Departure Runway	Open RWY menu
SI	Sector Indicator	Open next controller popup list	Simulation popup
Not shown	Manual Coordination flag	Accept Manual coordination
DEP	Departure Coordination.	Toggle between: Estimate (EST) Depart (DEP) Abort (ABT)
CLRCLR)	Combined clearance received flag, DCL dialogue status and CMT (Comment) indicator	Open PDC/DCL Window	Open CMT Pop-up
STD(XFL)	DepartureExit StandFlight Level	Open StandXFL menu
(STS)COPX	Ground Status	Open Ground State menu
OP_TEXT2	OP-TEXT2 message	Edit OP_TEXT2

2.3 Load List

Data Fields	Description	Left-click action	Right-click action
C/S	CALLSIGN	Open Callsign menu
No	Number of aircraft Number can be set by prefixing the aircraft type in the FPL by “X/” where X is the number.
R	Flight rules “V” if VFR “Y” if first IFR and later VFR “Z” if first VFR and later IFR
(ETN)	Estimated Time Over sector entry
PEL	Planned Entry Level	Open PEL menu	Open Vertical Aid Window
COPN	EntryExit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
ADEP(DRWY)	Departure aerodrome
ADES	Destination aerodromeRunway	Open FPL Window	Open ES flight plan dialog
PSSR	Previous mode A code		Find PSSR
ASSR	Assigned mode A code	Open ASSRRWY menu
STS(RMK)	GroundRemarks (scratchpad Statustext/OP-TEXT2)	Edit scratch pad string(OP_TEXT2)
C(CTOT)	CheckCTOT Indicator(Calculated Take Off Time)	ToggleOpen CheckTime Indicatormenu (CTOT)	Reset CTOT to EOBT

2.43.3 UncontrolledTake-Off List

1

Shows &traffic 2with ground state T/O until the aircraft is airborne. Once the aircraft is airborne the flight will be moved to the Sector list.

aircraft
Number

Data Fields	Description	Left-click action	Right-click action
(C/S)STS)	CALLSIGNGround Status	Open Ground State menu	Assume / Transfer
C/S	Callsign	Open Callsign menu	Toggle callsign highlight
SI	Sector Indicator	Open next controller popup list	Assume / Transfer
ATYP	Aircraft type	Toggle ATYP highlight
W	Wake turbulence category	Toggle WTC highlight
RTE/AHD	Displays AHDG if set Displays SID if no AHDG set.	Open SID menu	Open AHDG menu
(XFL)	Exit Flight Level	Open XFL menu
ASSRCOPX	AssignedExit modecoordination A codepoint	Open ASSRWaypoint menu	Toggle Route draw with MTCD
(DRWY)	Departure Runway	Open RWY menu
No(RMK)	NumberRemarks (scratchpad oftext/OP-TEXT2)	Edit canscratch bepad setstring(OP_TEXT2)

3.4 ADC Sector List (Arrival Sequence)

Shows arriving traffic within 40 track miles with ground state ARR (Arrival).

This list is sorted by prefixingETA.

the
aircrafttypeintheby“X/”Xthenumber.

Data FPLFields	Description	Left-click whereaction	Right-click isaction
(STS)	Ground Status	Open Ground State menu	Assume / Transfer
C/S	Callsign	Open Callsign menu	Toggle callsign highlight
SI	Sector Indicator	Open next controller popup list	Assume / Transfer
ATYP	Aircraft type	Toggle ATYP highlight
W	Wake turbulence category	Toggle WTC highlight
STD	Arrival Stand	Open Stand menu
ARWY	Arrival Runway	Open RWY menu
C/L	Cleared to land Flag	Toggle Mark
(RMK)	Remarks (scratchpad text/OP-TEXT2)	Edit scratch pad string(OP_TEXT2)

3.4 Taxi In List

Shows arriving traffic with ground state TAXI IN.

This list is sorted by call sign.

Data Fields	Description	Left-click action	Right-click action
(STS)	Ground Status	Open Ground State menu	Assume / Transfer
C/S	Callsign	Open Callsign menu	Toggle callsign highlight
SI	Sector Indicator	Open next controller popup list	Assume / Transfer
ATYP	Aircraft type	Toggle ATYP highlight
ADEP	Departure aerodrome
EOBTSTD	EOBTArrival (Estimated Off Block Time)Stand	Open Time menu (EOBT)
ATD	ATD (Actual Time of Departure)	Open Time menu (ATD)	Reset ATD to EOBT
ADES	Destination aerodrome	Open FPL Window	Open ES flight plan dialog
ETA	Estimated Time of Arrival
FCOPN	FIR Entry coordination point		Toggle Route draw with MTCD
PEL	Planned Entry Level	Open PEL menu	Open Vertical Aid Window
FETN	Estimated Time Over FIR Entry entry
FCOPX	FIR Exit coordination point		Toggle Route draw with MTCD
LFUNC	Logical Funtion (SI)	Open next controller popup list	Simulation popup
OP_TEXT	Flight information message	Edit OP_TEXT
C	Check Indicator	Toggle Check Indicator

2.5 Traffic Management List 1 & 2

Data Fields	Description	Left-click action	Right-click action
EVT	Event indicatior
COPN	Entry Coordination point	Open Waypoint menu	Toggle Route draw with MTCD
SI	Sector Indicator	Open next controller popup list	Simulation popup
C/S	CALLSIGN	Open Callsign menu
ASSR	Assigned mode A code	Open ASSR menu	Send CPDLC Squawk SSR
AFL	Actual Flight Level	Open AFL menu
CFL	Cleared Flight Level	Open CFL menu	Open Vertical Aid Window
ATYP	Aircraft type	Toggle ATYP highlight
RFL	Requested Flight Level	Open RFL menu
COPX	Exit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
FF	Feeder fix (provided by AMAN)
STA	Scheduled Time of Arrival at feeder fix (provided by AMAN)
TTLTTG	Time To Lose/Gain at feeder fix (provided by AMAN)
(ETO)	Estimated Time Over TML waypoint if selected or ETA
STAR	Assigned STAR	Open STAR menu	Acknowledge STAR Allocation
ETA	Estimated Time of Arrival
FText	Free Text	Edit FText
C	Check Indicator	Toggle Check Indicator
HOLD	Hold indicator	Toggle TML HOLD/XHOLD

2.6 Sector Inbound List

Editscratchpad

Data Fields	Description	Left-click action	Right-click action
C/S	CALLSIGN	Open Callsign menu
PSSR	Previous mode A code		Find PSSR
ASSR	Assigned mode A code	Open ASSRStand menu
(ETN)RMK)	EstimatedRemarks (scratchpad Time Over sector entrytext/OP-TEXT2)
PEL	Planned Entry Level	Open PEL menu	Open Vertical Aid Window
COPN	Entry Coordination point	Open Waypoint menu	Toggle Route draw with MTCD
R	Flight rules “V” if VFR “Y” if first IFR and later VFR “Z” if first VFR and later IFR
XFL	Exit Flight Level	Open XFL menu	Open Vertical Aid Window
COPX	Exit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
RFL	Requested Flight Level	Open RFL menu
ADEP	Departure aerodrome
ADES	Destination aerodrome	Open FPL Window	Open ES flight plan dialog
SI	Sector Indicator	Open next controller popup list	Simulation popup
Not shown	Manual Coordination flag	Accept Manual coordination
C	Check Indicator	Toggle Check Indicatorstring(OP_TEXT2)

2.73.5 ETWRSector List

Data Fields	Description	Left-click action	Right-click action
C/S	CALLSIGN	Open Callsign menu
PSSR	Previous mode A code		Find PSSR
ASSR	Assigned mode A code	Open ASSR menu
(ETN)	Estimated Time Over sector entry
PEL	Planned Entry Level	Open PEL menu	Open Vertical Aid Window
COPN	Entry Coordination point	Open Waypoint menu	Toggle Route draw with MTCD
R	Flight rules “V” if VFR “Y” if first IFR and laterUncontrolled VFR “Z”List if1 first& VFR2 For a description of the Sector List and later IFR
XFL	Exit Flight Level	Open XFL menu	Open Vertical Aid Window
COPX	Exit coordination point	Open Waypoint menu	Toggle Route draw with MTCD
RFL	Requested Flight Level	Open RFL menu
ADEP	Departure aerodrome
SID	Assigned SID	Open SID menu	Acknowledge SID Allocation
DRWY	Departure Runway	Open RWY menu
ADES	Destination aerodrome	Open FPL Window	Open ES flight plan dialog
SI	Sector Indicator	Open next controller popup list	Simulation popup
Not shown	Manual Coordination flag	Accept Manual coordination
STS	Ground Status
C	Check Indicator	Toggle Check Indicator

2.8 Flight PlanUncontrolled List

1&2,TopSky.

Datasee Fields	Description	Left-click action	Right-click action
(C/S)	CALLSIGN	Open Callsign menu
ADEP	Departure aerodrome
ADES	Destination aerodrome	Open FPL Window	Open ES flight plan dialog
ASSR	Assigned mode A code	Open ASSR menu
SI	Sector Indicator	Open next controller popup list	Simulation popup
STS	Ground Status
STATE	Flight Plan State NOTST (Not Started) SIMUL (Simulated) TERM (Terminated)	Open Flight Plan State menu

2.9 Resectorisation List

Data Fields	Description	Left-click action	Right-click action
(C/S)	CALLSIGN	Open Callsign menu
SI	Sector Indicator	Assume	Simulation popup
CFL	Cleared Flight Level		Open Vertical Aid Window
COPX	Exit coordination point		Toggle Route draw with MTCD
ASSR	Assigned mode A code
CLR	Combined clearance received flag, DCL dialogue status and CMT (Comment) indicator
STS	Ground Status
C	Check Indicator	Toggle Check Indicator